KEEP IT FLEXIBLE
Monthly
$5 USD / month
$5 billed monthly.
A month at a time, for the projects ahead.
Available at launch
2D PLASMA CAM · BUILT BY JD’S GARAGE
Less time programming.
More time cutting.
Your design is ready. Your CAM workflow should be simple.
Import a DXF or SVG, set up your toolpath, and export G-code. A focused workflow for CNC plasma, without a full CAD/CAM learning curve.
$5/month or $30/year. Save 50% annually.
Launch preparation: subscriptions and account registration are not open yet.
Preview the cut paths, lead-ins and rapid moves before exporting.
Open full screenshotDXF + SVG importToolpath previewG-code exportSupported machine control
LESS SETUP. LESS TO LEARN.
Built for the job
you actually need to do.
You already have a 2D design. GarageCAM keeps the next steps together: import, set your cutting parameters, preview, and export.
Previous Fusion 360 workflow~15 min
GarageCAM workflow~30 sec
From DXF to G-code preparation.
FROM DESIGN TO G-CODE
Three steps. One focused workspace.
Spend your time making parts, with the controls you need close at hand.
- 01
Bring your design
Import a DXF or SVG and check your geometry in the CAM workspace.
- 02
Make the toolpath yours
Set feed rate, kerf and pierce delay. Generate a toolpath and preview the cutting sequence.
- 03
Run on your machine
Load your G-code into Machine Control, connect your controller, and run your job.
Always verify settings, toolpaths and machine compatibility before cutting.
SIMPLE PRICING
One tool. Two simple plans.
The same GarageCAM features, whichever plan fits your shop.
MORE TIME IN THE SHOP
Annual
$30 USD / year
Equivalent to $2.50/month. $30 billed yearly.
Save $30 a year compared with paying monthly.
Available at launch
Included in both plans
- DXF and SVG import
- Toolpath generation and preview
- G-code export
- Machine control for supported controllers
- Personal and commercial use
- One named user
Annual savings compare $30/year with 12 monthly payments of $5 ($60/year).
Prices include applicable sales tax/VAT. Subscriptions renew automatically until canceled. Manage or cancel renewal through Paddle. Cancellation stops the next renewal; it does not automatically refund a payment.
One named user, for personal or commercial use. Creating an account does not grant access.
Is this a replacement for drawing software?
GarageCAM is focused on 2D plasma CAM. Create your design in your preferred drawing or CAD software, then import a DXF or SVG to prepare toolpaths.
Will it work with my machine?
GarageCAM works with all JD’s Garage machines, as well as grblHAL and FluidNC controllers.
How long does it take to prepare a file?
Go from a DXF file to G-code and start cutting on your machine in a minute or less, compared with 15 minutes using Fusion 360.
Can I cancel my subscription?
Yes. Manage or cancel automatic renewal through Paddle. See the refund and cancellation policy for refund eligibility and what happens to access.
BUILT FOR YOUR GARAGE
Get back to making things.
Simple plasma CAM. From your design to your next cut.